top of page

August 21, 2018 | Vaughn J. Mantor

​

 

In Montana, along the Missouri river where Lewis & Clark followed Thomas Jefferson’s instructions to cross the continent, a fish hatchery wants to expand for several reasons: the existing water intakes for the hatchery are increasingly unreliable; and the demand for certain species of fish is much higher.

​

Expansion of the hatchery will require more water.

file0.jpg

Fortunately, a hydroelectric dam of 185 Megawatts is about two miles away. The water to be piped to the hatchery must meet certain specifications, among which is cleanliness, therefore the water will be taken from the dam’s penstocks, that is at a point before the water goes to the turbines.

​

The situation calls for an engineering feasibility study to assess the various, inter-related, cost factors:

  • high cost of losing all the fish should the water supply fail

  • size of the expansion

  • volume of water needed

  • cost of construction at the hatchery

  • cost of water

  • cost of connections and construction at the dam

  • cost of piping

  • cost of installing the piping

  • cost of a right-of-way, et al.

  • ​

Our client, the engineering firm employed to assess feasibility, decided to use Verify 3D to take laser scans of the hatchery and the dam.

​

A modern fish hatchery is not a simple thing….

​

Neither is a Hydroelectric Dam

file1.jpg.webp

At the hatchery, small differences in the conditions in which the fish hatch can kill them all. Many variables must be measured and adjusted continually. It’s a complicated job to increase the capacity of the hatchery and also avoid unduly interfering with normal production.

 

A glance at the hatchery images above and below shows the potential for serious cost overruns if any measurements are wrong or missing. When one includes the complexity of the hydroelectric dam and making connections there, the difficulty of the feasibility study is nearly doubled.

file2.jpg

According to the professional engineer in charge of the work, “[laser scanning with Verify 3D] saved us three weeks on the project.” He was referring to cutting three weeks from the project plan. The plan anticipated a long time to collect measurements by other means and several return visits to the site. It took Verify 3D just one day to collect complete measurements, accurate to 3-4 mm, in both the hatchery and the dam. It’s too soon to evaluate other savings that may be achieved by the use of laser scanning on this project. When more results are in, we’ll post an addendum to this report.

file3.jpg
file4.jpg

If you’d like a personal explanation or demonstration of the ways laser scanning can help you or if you'd like to speak to one of our clients, our contact information is directly below.

 

Because our experience in this technology dates back to 2002, Verify 3D knows the most appropriate equipment to use on each project and how to use it for the best benefit to our clients.

bottom of page